Plano, TX metal roofs, formed and installed by PMRS
Plano Metal Roofing, From East Plano Ranches to Willow Bend
A Plano house built in the 1970s or 80s may already be wearing its second or third composition roof, and switching to metal ends that cycle. Permanent Metal Roofing Systems works all over the city, from single-storey ranches in East Plano to bigger homes around Willow Bend, installing standing seam where clean lines suit the house and stone-coated steel or metal shingles where a textured look does. We also roof commercial buildings along the Dallas North Tollway and US 75. Most of Plano is in Collin County, with a western strip in Denton County, and the city is about 15 miles from our Mesquite office.
- 20+ years of experience
- Lifetime limited warranty
- Free written estimates
The Houses of Plano and the Metal Roofs That Suit Them
Brick-veneer homes from the 1970s through the 1990s dominate Plano, one and two storeys alike, almost all of them under composition shingle. In East Plano and around Historic Downtown, the single-storey hip and gable roofs are a natural match for snap lock standing seam, which breaks the habit of tearing off and reshingling every couple of decades. The city’s many two-storeys have busier rooflines, and there a stone-coated steel or metal shake roof suits the brick and blends with the neighbors. West Plano’s 2000s luxury houses around Willow Bend and Kings Ridge often add bigger, steeper roofs with bays and turrets, and metal slate, copper details or mechanical lock standing seam fit that architecture.
We serve East Plano and Historic Downtown, Kings Ridge, Legacy West, and West Plano around Willow Bend, plus homes near Arbor Hills Nature Preserve and along US 75 and the Dallas North Tollway.
Why Plano Roofs Take a Beating
Plano’s recent storms show both threats. The May 28, 2024 system knocked down trees around Parker Road and Independence Parkway and produced hail up to 2.75 inches at Lowry Crossing, elsewhere in Collin County. Then, in March 2025, reports put tennis-ball hail, about 2.25 inches, close to Plano once more. Hail like that bruises composition shingles and can dent thin metal. DECRA has tested its stone-coated steel to the UL 2218 Class 4 level, and 22- or 24-gauge standing seam keeps cosmetic dents down; how much credit a Class 4 roof earns is up to each carrier. For wind, concealed clips set closer together along the edges resist uplift.
- Metal roofing systems with UL 2218 Class 4 ratings available, with the documentation insurers ask for
- Photo-documented roof inspections after hail and wind
- A written, itemized scope you can share with your adjuster
See how Class 4 impact-rated metal roofing works, what to do about hail damage and insurance claims, or compare standing seam systems and stone-coated steel.
Our Metal Roofing Work in Plano, TX
Two systems carry most Plano jobs. For the single-storey 1970s-80s houses whose owners are tired of reroofing, snap lock standing seam is the usual answer. For West Plano streets where HOA rules govern materials, stone-coated steel and metal shingles fit best. The larger West Plano homes leave room for copper or zinc accents and metal slate, and commercial owners near Legacy West and the tollway can have standing seam or low-slope metal roofs installed by our crews.
Standing Seam Roofs
A clean, modern roof with no exposed screws to back out, available with Class 4 impact-rated assemblies.
Stone-Coated Steel
Steel panels coated in stone granules for the look of shake, shingle or tile, with impact ratings from the manufacturer.
Metal Shingles and Shakes
Interlocking metal shingles that shed hail and wind and keep a cedar, slate or tile appearance.
Corrugated and PBR Roofs
Corrugated and PBR panels for homes, shops, barns, carports and porches around Plano.
Copper and Zinc Roofing
Natural copper and zinc in standing seam, flat lock or diamond panels for whole roofs, bays and turrets.
Metal Roof Repair
Leaks at seams, screws, pipe boots and flashing traced and fixed on Plano metal roofs, ours or not.
Every Plano roof is priced from its own measurements. The metal roof cost guide explains which choices move the number most, from pitch and tear-off to profile and metal.
Plano HOA Rules and City Permits for Metal
Plano splits by age. Many 1970s-80s subdivisions in the east have no HOA, so owners there choose freely. West Plano is the opposite: communities from the 1990s on have active HOAs and written rules on exterior materials. For those homes, the Texas Property Code’s section 202.011 says a board may not ban a shingle engineered for hail and wind resistance or energy savings, so long as it resembles the community’s approved shingles, is more durable and of comparable or better quality, and matches the area’s aesthetics. We confirm which rules cover your address, prepare any HOA request and obtain the city’s permit where one applies.
Plano Coverage Snapshot
| Counties | Collin County (also Denton) |
| Residents | Roughly 290,000 |
| Typical home | median value $466,000; half built in 1993 or earlier (Census ACS 2020-2024) |
| From our base | About 15 miles from Mesquite |
| Roof systems | Standing seam, metal shingles and shakes, stone-coated steel, corrugated and PBR, copper and zinc |
| Services | New roofs, replacements, repairs and hail damage documentation |
| Estimate and warranty | Free, measured and itemized in writing; lifetime non-prorated limited warranty on PMRS standing seam, transferable one time |
Built and Installed by One Company, in Plano Too
- Class 4 impact-rated systems and the product documentation insurers ask for.
- Your deductible stays your deductible. Texas law bars roofers from covering it, and we comply.
- HOA approval packages with product sheets and color samples.
- Metal roofing specialists since 2006, with our own crews on every job.
- Panels and trim formed by PMRS in Mesquite or on site, so every piece fits the roof it was made for.
Plano Metal Roof Questions
Does a Plano house on its third roof need a full tear-off?
We recommend one. A house that has been reroofed twice may be hiding an extra shingle layer, and burying it under metal holds in heat and moisture and hides any soft decking. Taking everything down to the deck lets us replace weak boards, put down high-temperature underlayment and flash each wall properly. The tear-off appears as a separate line on your written estimate.
Will a Willow Bend HOA allow copper over a bay or entry?
Often, once the committee signs off. West Plano associations have written material rules, so a sample and the product data go in before anything is ordered. A bay, entry porch or turret can be roofed in copper or zinc mechanical lock panels while stone-coated steel or standing seam covers the rest. As copper ages from bright to brown, it looks at home on brick and stone.
Which metal roof suits a single-storey East Plano ranch?
Snap lock standing seam, in most cases. These 1970s-80s homes usually have simple hip or gable roofs at 3/12 or steeper, so long panels go on efficiently with few seams to detail. Prefer the look of shingles? A metal shingle gives that texture instead. Either one replaces the routine of new shingles every twenty years with a roof designed to last far longer.
How long does a metal roof installation take in Plano?
Most homes take a few working days once the panels are formed, depending on size, pitch, tear-off and weather. Your estimate includes a time frame, and our office keeps you posted on the schedule.
More Cities Near Plano
The full list lives on our DFW service areas page, and the office details are on our Mesquite location page.
Book Your Free Plano Roof Estimate
A Plano estimate costs nothing and comes itemized, with straight answers on panel profile, color and timing.