Metal roof installation in Frisco, TX
Frisco Metal Roofs for Starwood, Stonebriar and Frisco Lakes
In May 2024, tennis-ball hail was reported where El Dorado Parkway crosses FM 423, and that storm put metal roofing on the list for many Frisco owners. Permanent Metal Roofing Systems roofs homes across the city, most of it in Collin County with the west side in Denton County, using DECRA stone-coated steel, EDCO and Classic shakes and shingles, and standing seam. Frisco sits about 26 miles from our Mesquite office, at the northern limit of our usual area, so the office books estimates here in advance and lines them up with other stops in Collin County. Once a job is booked, the distance has no effect on how the roof is built.
- 20+ years of experience
- Lifetime limited warranty
- Free written estimates
Roof Types We See Around Frisco
The typical Frisco house has two stories, walls of brick and stone, and a composition roof with many gables, built inside a planned community at some point from the 2000s on. Neighborhoods from the first wave, such as Starwood and Stonebriar, have now had twenty years or more of sun and hail on their shingles and flashing. To hold the dimensional character that the developers designed in, owners there tend to pick DECRA Shake XD or Shingle XD, or EDCO’s ArrowLine shake. Homes in Phillips Creek Ranch and the later phases are just as steep, and on them a standing seam accent over a porch or bay adds contrast. In Frisco Lakes, the Del Webb community, light aluminum shingles from Classic suit the homes well.
We roof homes in Phillips Creek Ranch, Frisco Lakes (Del Webb), Starwood and Stonebriar, from the Sam Rayburn and Dallas North tollways to the area around Toyota Stadium, the RoughRiders ballpark, The Star and the PGA of America headquarters.
Weather Notes for a Frisco Metal Roof
That El Dorado Parkway storm was not the only hail of the month. Frisco Lakes caught its own on May 22, 2024, with hailstones between one and two inches. For a large two-story roof, that frequency is the argument for impact-tested products, and DECRA and EDCO each list several lines at UL 2218 Class 4. The granular face of stone-coated steel also hides small marks that would show on a smooth panel. Ask your carrier how it treats Class 4 roofs, since each company writes its own discount, and keep the product paperwork we hand you when the job is finished.
- Impact-rated standing seam, stone-coated steel and metal shingle options
- Heavier 24-gauge panels that resist cosmetic hail dents better than thinner steel
- Clip spacing and fastening planned for Texas wind uplift
See how Class 4 impact-rated metal roofing works, what to do about hail damage and insurance claims, or compare standing seam systems and stone-coated steel.
Metal Roofing Systems We Install in Frisco
Architectural control decides most Frisco roofs, which is why stone-coated and metal shake systems carry most of our work here: they keep a dimensional shake or shingle look and come with Class 4 ratings from their makers. Standing seam is the choice for porches, bays, accents and modern-style homes. Because Frisco is at the far end of our drive, we schedule material and crew to arrive together, and our mobile roll former can produce standing seam panels right on site.
Standing Seam Roofs
Snap lock and mechanical lock panels with concealed clips, formed in Mesquite or on site and run the full length of each Frisco roof slope.
Stone-Coated Steel
DECRA shake, shingle and tile profiles that keep a traditional look on Frisco homes in HOA neighborhoods.
Metal Shingles and Shakes
Aluminum and steel shakes and slate-look shingles for homeowners who want metal performance without a ribbed look.
Corrugated and PBR Roofs
Ribbed panels for barns, shops and porch roofs, cut to the length of each run before they reach the site.
Copper and Zinc Roofing
Natural copper and zinc in standing seam, flat lock or diamond panels for whole roofs, bays and turrets.
Metal Roof Repair
Loose fasteners, failed sealant and storm-damaged panels repaired or replaced one section at a time.
How much will it cost? That depends on size, pitch, profile, metal and tear-off, so we measure first. Our cost guide walks through the seven factors.
Frisco HOA Rules and City Permits for Metal
Frisco is HOA territory. Almost any neighborhood here newer than 1995 has an architectural control committee with a say over roof color and exterior materials. Owners do have a counterweight in the Texas Property Code. Its section 202.011 generally keeps a board from forbidding shingles designed for hail and wind or for energy efficiency when they resemble the approved roofs, are at least equal in quality and durability, and match the neighborhood; the board still governs color and appearance. Because the statute speaks of shingles, stone-coated shakes and metal shingles fit it most cleanly. We prepare the packet with product data and samples and handle the City of Frisco permit where required.
Frisco Coverage Snapshot
| Counties | Collin County (also Denton) |
| Residents | Roughly 240,000 |
| Typical home | median value $642,000; half built in 2009 or earlier (Census ACS 2020-2024) |
| From our base | About 26 miles from Mesquite |
| Roof systems | Standing seam, metal shingles and shakes, stone-coated steel, corrugated and PBR, copper and zinc |
| Services | New roofs, replacements, repairs and hail damage documentation |
| Estimate and warranty | Free, measured and itemized in writing; lifetime non-prorated limited warranty on PMRS standing seam, transferable one time |
What a PMRS Roof Means for Frisco Owners
- Your deductible stays your deductible. Texas law bars roofers from covering it, and we comply.
- HOA approval packages with product sheets and color samples.
- Metal roofing specialists since 2006, with our own crews on every job.
- Panels and trim formed by PMRS in Mesquite or on site, so every piece fits the roof it was made for.
- Written, itemized estimates that spell out panel, gauge, finish, underlayment and trim.
What Frisco Owners Ask About Metal Roofs
Frisco is near the edge of your service area. How far ahead should I call?
Earlier is better. We group Frisco visits with other Collin County appointments instead of making single trips, so the office will offer a set time rather than a same-day stop, and calls are returned the same business day. After a big hailstorm, demand jumps across North Texas, so the sooner you call, the more choice you have over appointment and installation dates.
Will a Frisco architectural committee accept a full standing seam roof?
Sometimes, but it takes more work than a stone-coated roof. The state law that limits HOA bans is written around shingles that resemble approved roofs, so a ribbed metal panel sits outside its plainest reading. Many owners use standing seam as an accent over porches and bays instead. If you want the whole roof in standing seam, submit drawings and samples early and expect questions.
Which metal roof suits a home in Frisco Lakes?
Lighter aluminum shingles are a good match. By the maker’s figures, Classic’s Oxford and Rustic shingles weigh roughly 40 to 42 pounds per 100 square feet, and aluminum will not rust. Stone-coated steel is another option. Frisco Lakes took 1- to 2-inch hail in May 2024, so ask about the impact documentation each product carries, and check the community’s color guidelines before choosing.
Is the roof estimate in Frisco really free?
Yes. We inspect the roof, check the decking and flashing, measure every plane, and send a written estimate that lists each line of the job. There is no charge and no obligation, and Frisco is roughly 26 miles from our Mesquite base.
Close to Frisco, Also on Our Schedule
The full list lives on our DFW service areas page, and the office details are on our Mesquite location page.
Price a Metal Roof for Your Frisco Property
Our Mesquite office books estimates across Collin County, Frisco included. Call (469) 466-2421 or send the form.